2wire update
Monday, October 24, 2011
0
comments
Connecting to another serial port on the mainboard I was able to get the following.
Settings:
speed: 9600bps
data bits and parity: 8, none
stop bits: 1
Receive polarity: Idle 1
output type: normal (H=3.3v, L=GND
Connected bus pirate in bridge transparent mode.
CG9fÿCG9f43R1H5
<#F1D1A00008800S13800
F1D2A00020000S5024
F1D3A00038a94S6e4c
F1D4A00800000S734
>
<0x025024+0x012fdc>[VVVVvvvvMPHW ver 9f43, SW ver 1.7.4 Nov 2 2006 01:43:24
drop:0x20ee4+0x4140,<0x020ee4+0x01711c>
HW config=[12B6,016b],PHY_OPS=1c
<0x038000+=0x007fe0>
<71988>]cpu:15336, pkt:39204
$
After I get to the user enabled terminal it doesn't accept any user input. I tried changing the configurations around to no luck. I have a feeling I need to connect directly with a true serial connection instead of via bus pirate using USB to Serial via FTDI chip.
Should be closer in a few weeks when I have more time to mess around with this.
Settings:
speed: 9600bps
data bits and parity: 8, none
stop bits: 1
Receive polarity: Idle 1
output type: normal (H=3.3v, L=GND
Connected bus pirate in bridge transparent mode.
CG9fÿCG9f43R1H5
<#F1D1A00008800S13800
F1D2A00020000S5024
F1D3A00038a94S6e4c
F1D4A00800000S734
>
<0x025024+0x012fdc>[VVVVvvvvMPHW ver 9f43, SW ver 1.7.4 Nov 2 2006 01:43:24
drop:0x20ee4+0x4140,<0x020ee4+0x01711c>
HW config=[12B6,016b],PHY_OPS=1c
<0x038000+=0x007fe0>
<71988>]cpu:15336, pkt:39204
$
After I get to the user enabled terminal it doesn't accept any user input. I tried changing the configurations around to no luck. I have a feeling I need to connect directly with a true serial connection instead of via bus pirate using USB to Serial via FTDI chip.
Should be closer in a few weeks when I have more time to mess around with this.
Labels:
2wire att hacking