Show me the money

Thursday, September 8, 2011 Posted by Unknown 0 comments
Have you always wanted more money. Well today you can get more money no not bitcoin mining. How to hack some of your favorite games to get more money.

In game memory hacking tool. For rooted phones only.

Install GameCIH2 from the market.
Open it grant root privileges and set your settings.  the Hot-key isn’t really needed anymore as the toolbar stays on top.

You should see the side bar if you click it, it will expand to give you options. whatever program you have open is what it will search.

Open your favorite game. i.e. contract killer, gold Miner, whoreR’us, robot defense.

Can’t get somethin for nothin. Collect some money/credits first. Once you have lets say $500 open the GameCIH2 toolbar. Click the search button. Click input number. Enter in the value you have for the money in this example 500. It will say found 11k  or so. WAY to much to search through by hand. hit the back button back to the game. Spend some of that fancy money. Lets say now you have $342. From the tool bar click on search tool again. Click input number. Search for 343. This is now going to search for 342 in the results of the search from 500. Repeat this until you get down to 4 or 5 results. Sometimes the programs will name it “money”, “cash”, etc.. Some times it will have two spots that you need to change the value in. Just click on the value you want to change and enter in some 9’s.. hit modify. You are now a rich bastard. have fun.

If the value doesn’t change spend some more it will then update the gui with your new found riches.

Screenshots coming soon......

2wire Terminal Dump

Tuesday, September 6, 2011 Posted by Unknown 0 comments
Connecting to Serial interface on the AT&T U-verse router. Once you open the bad boy up Solder pins to the main board. (post pictures soon. Pin 1: Power 3.3v Pin 2: RX aka Data from unit to PC aka (MISO) Pin 3: TX aka Data from PC to Unit aka (MOSI). Pin 4: Ground.  Connecting via Bus Pirate @ 38400 baudrate. Set the bus pirate to UART  with default  settings. Used macro (1) that sets up a transparent bridge.  Make sure nothing else is plugged into the router (RJ-45, Broadband, USB) Takes about 1-2min to load.

Used "Tera Term" for my terminal. Terminal Dump Just ran through each option to show all menus.

If you like Linux (Like I do, but I just had a problem with the driver) Minicom will work perfect.

More to come.. I still have two other possible serial connections points on the main board. Also, if I can't get the firmware this way I will have to find a way to take it off the ROM chip its self using SPI/RAW2Wire/etc.

source: Wasn't much help :p but did help so here is some credit :) http://rsaxvc.net/blog/2011/01/opening-and-getting-console-on-att-u-verse-3800hgv-b.html
Labels:

WTF WHIP Interface?

Posted by Unknown 1 comments
I was after something else and stumbled on this.

Anyone here ever hear of a WHIP interface? Found a way to enable it by connecting via a serial connection to pins I soldered on the main board. 2wire router(AT&T uverse, etc..)  One of the options on the terminal was to enable “WHIP interface.” After a lot of research it could only mean “Wireless Host Interface Protocol.”

Its a UART(serial) to wireless seams like it operates in the ~890Mhz +-10Mhz range. Seems to be used for MESH networks. Used the software at the following places: Software and hardware for EUR. Cache, parts of the site seam down.  software and hardware  In the software I was able to connect to the COM port. I was able to change setting and send packets and search for “modules” but couldn't find any. Not sure if this was because; my settings were off, Antenna wasn’t strong enough, or simply no one was around to talk to.

Whats weird about this is, zero documentation. zip, zero, none. They don’t even have the FCC codes on the side or inside or anywhere showing this device can preform these actions.  What kind of scares me and I think is illegal. I don’t think this is a good idea that routers can start talking to each other with out anyone knowing. Thinking its a start of setting up a mobile WiMAX or WiMAX
node B / Radio Network Controller / WiMax


PDF of a commercial product that is using this technology. Amber PDF

Patent that seams to be talking about something similar.

There is no real purpose to this post. Its more of a FYI look at some shit I found. If you have any other information or insight that might be of interest let me know.



(Note: I was after the firmware. I am still in the process of downloading this. Once I get it, I might be able to figure out what all this non-sense is.)
Labels:

Snipping Tool

Wednesday, August 3, 2011 Posted by Unknown 0 comments
Snipping tool used in Windows 7 and Windows Tablet for Windows XP.

Extracted the file snipping tool from the following Microsoft package.

http://download.cnet.com/Microsoft-Experience-Pack-for-Tablet-PC/3000-10250_4-10729528.html

Using the steps located here: http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/ce13fd12-d096-4caa-9073-e0f70696a840/   With some modification to the steps. You have to download the updated i6comp002 and unzip the entire contents.

I then created a .vbs script that will create a short cut to the desktop and create a hot key CTRL+ALT+F to open the program.

Everything is in a Self Extracting File. and auto runs the .vbs script.

Can be downloaded here: http://www.mediafire.com/?hpub96pxas4erm2